How do I drive a Piky Car (Dacia Spring)?

Driving a Piky Car is easy: the operation is similar to an automatic transmission vehicle, but instead of a key you’ll find a rotary switch.

1. Starting the rental
   After starting the rental via the app, the central locking system will unlock.
   You can then get inside, close the doors, and fasten your seatbelt (the car will not start unless the seatbelt is fastened).
2. Turning on the vehicle
   Turn the rotary switch (where the ignition key would be) clockwise twice.
   Set the gear selector to “N.” The selector varies depending on the model: you may find a knob to turn or a lever to push.
   Then press and hold the brake pedal while turning the switch once more to simulate starting the engine.
   If everything was done correctly, the green “READY” message will appear steadily on the display.
3. In case of error
   If the “READY” message is flashing, it means something was done incorrectly. In this case:
   • release the brake pedal
   • turn the switch counterclockwise to turn off the dashboard
   • repeat the procedure from step
4. Selecting the gear
   While holding the brake pedal, use the gear selector to choose the driving mode:
   • • D = drive
     • R = reverse
     • N = neutral
5. Starting to drive
   After selecting the gear, gently press the accelerator pedal to start driving.
6. Onboard features
   Piky Cars are equipped with turn indicators, hazard lights, and a horn.

Important note
Being an electric vehicle, the Piky Car has a very quick take-off. We recommend pressing the accelerator gently, especially when starting from a stop.